Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you plan attempt to remove the window repairs near me panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll have to open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Most often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking that was used up might need to be removed before a new layer is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it blows open with a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical part hinges will be damaged over time. It is an easy process, but it's easier to do if you have someone to help you hold the frame in place.

It is also important to ensure that the upvc window repair hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us photos through our website can often resolve the problem. We are always happy to provide suggestions.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be misaligned due to wear, which can cause an opening where the sash and frame meet. If they are damaged beyond repair, it might be required to realign them. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it's feasible to give them a thorough clean, upvc window repairs however in some cases it might be necessary to have these replaced.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it is cheaper to replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional immediately.