Locked Keys in Car? Here's How to Open Your Car Without Damage

Don't be worried if you've accidentally locked keys in car (get redirected here) your keys in your vehicle. You can try a variety of ways before calling for locksmith or roadside assistance.

For instance, you can make use of a shoelace with a slip knot to tie up the post lock, or a wire coat hanger that you untwist and shape into hook. You can also make use of an inflatable wedge or a door wedge.

Pump Wedge

If you've been stuck in a car locked up and no DIY solutions like shoestrings, wire hangers or wedges work for you then it's time to contact an expert. A locksmith or repo service provider might have lockout tools that will allow you to open your vehicle without causing any damage.

Use them correctly if they are available. Know where to place the wedge tool. Many people place the wedge tool in the top corner of the door, which is the most vulnerable. This is not a good idea as you're more likely to harm the weather stripping as well as the wires inside the door. Instead, put the wedge in the biggest part of the gap is visible and where it will have maximum leverage.

The Pump Wedge is an inflatable wedge constructed of high-quality vinyl that doesn't damage the surface. It is placed between the door of the vehicle and the door frame, and then is inflated to create a gap. This allows you to access to other tools, such as a long-reach car opening tool rod. It has a hook at one end that you can make into a shape to hold the latch on the door handle.

This can be done using two wooden door stops. They can be used to pry open the gap between the back of the door. You could also make use of a slim Jim which is a thin metal strip which is bent into a hook, and then used to secure the lock. This method is not for the faint of heart, as you need to be careful not scratch the weather stripping on your door.

A shoelace is a good alternative, but it's only on older vehicles that don't have a push button for unlocking. You can tie a knot in the middle and move the lace up and down the door seam until you find the latch. Then, move the lace up and down until it is able to catch onto the lock. The slip knot should be tightened, then pull upward. This method is more difficult and can scratch the paint on the door or scratch the trim if not careful.

Inflatable Wedge

You can easily unlock your car using a wedge-shaped inflatable door opener. This will save you from using prying tools or slim jims. These wedges for cars can be placed between the window and the frame of the vehicle, and accidentally Locked keys in Car when they are inflated they create a space that is sufficient to accommodate an extended-reach tool like a slim jim or a button grabber. This method is far less dangerous than using a screwdriver and can be used even when you don't have access to an screwdriver.

A coat hanger made of wire that is shaped into a hook is a different option to unlock the car without damaging its exterior or interior. It can be used to grasp the lock and might be more effective than a flat screwdriver as it is less likely cause damage to the paint of the vehicle. However, you must inspect all the doors to ensure there is no other way to gain entry.

You can also use a plastic bag twisted into a noose or V-shaped shape. Be careful not to tear the bag, as it could make things worse. This method is particularly useful if you can't find the lock button. It may not be as secure as using the wedge or a metal coat hanger but it could be helpful when you are in a tight spot.

The best tip we can give you about being locked out of your car is to be at peace and focus on safety. There are a variety of options to deal with this issue. If you have read this article, you'll be prepared for any situation that may arise. You can unlock your car door lockout by following our directions. This will avoid unnecessary stress and damage. If you are able, bring your keys along when you leave your car.

Shoelace

It's one of those "oh crap!" moments that can make a day miserable. In the event of an emergency, it's a good idea keep a few things in your possession that can assist you in unlocking your car without damaging the windows. Some of these items are easy to locate and could help you avoid the expense of a locksmith or having to wait for roadside assistance to arrive.

A shoelace or twine could be used to unlock a car. It is easy to use and can be used on various vehicles. The key to this method is a car equipped with post locks. These can be stacked vertically on the sill of the window and easily accessible from outside the car. Use a shoelace and a slip knot to accomplish the task. Then, wiggle the shoelace through the crack between the window and door frame. Once the slip knot is set in the right place, pull both ends of the string upwards to lasso the lock.

This technique may only work on older models that have a locked that is hooked. A screwdriver, if it's available is a good tool to open the door in a more aggressive manner. Another option is to grab an object from a nearby object like a doorframe or a piece of wood, and then stick it into the window frame to make an opening for the rod you'll use to push the interior lock button.

While the above methods are relatively safe for most drivers, it is best to call for assistance whenever possible. This will prevent any additional damage to the vehicle and it will also reduce the chance of an accident caused by the stress of the situation. If you don't have a cell phone or are unable to call for assistance Be aware that it is crucial to inform trusted friends and family members know the location of your car at all times. A spare set of keys must be kept in a convenient location on your vehicle.

Wire Hanger

There is no doubt that locking your keys in the car can be a traumatic experience. However, the key is to remain calm and think through what your options are to get them back. You will avoid making the situation worse if don't get caught up in panic.

One of the best things you can do is use a modified wire coat hanger to get back into your vehicle. You'll need to uncoil the coat hanger to ensure that it has a straight slant and a hook that you can use to move the lock rod inside your door. When you are able to reach the rod, you will be able to pull it upwards to open the door.

You can also make use of a rod, or even an iron piece from your vehicle. It is essential to make sure that you don't cause any damage to your vehicle during the process and it is ideal to do this without removing the car apart. This method will work better for older cars than newer ones. However it is possible to use it on cars that have unique door handles.

You can do the same thing with the use of a shoestring tied into the slip knot. This will work on a postlock, but will be more difficult to maneuver as you'll rely on the tension of the string to hold it. It is possible to do this by threading a shoestring into the small hole you create in the weatherstripping of your vehicle's doors. After the shoestring has passed through the weatherstripping, you are able to pull it tight to create an elongated loop that snaps around the lock. If you are lucky you will find the lock at the right spot.