Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you're planning to try to remove the glass panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

It's a great idea seal the gap after the glass is removed. This will stop drafts and water from getting into your home until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the distance between the window and the door is substantial, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws until they remain in place.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Windows that leak water do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up may need to be removed before a new layer can be applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze, it may be the hinges that are at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause an opening to appear between the sash and the frame. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can be unbalanced. It is located on the hinge's side, and may need to be cleaned. In some instances it is possible to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it may be cheaper to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.